Pressure Systems offers an extensive array
of hardware to facilitate the installation of KPSI Transducers into almost
any application. Contact our Technical Support staff for assistance in
selecting the hardware that may best suit your application or if you have
unique requirements that may require a custom solution.
Anti-Snag Cone
Anti-Snag Cones are designed to fit over the cable end of either 1.0" or
0.75" diameter transducers to prevent the transducers from getting hung on
obstacles when pulling the cable. The cones are constructed of PVC and come
in separate sizes for the two diameters. |
 |
Cable Hanger
The Cable Hanger is used to suspend the transducers in the liquid
media. The hanger slides onto the cable from the unterminated end and is
easily positioned while pushing the ends of the hanger together. As the
hanger expands from the weight of the transducer, it grips the cable by the
sheath. The cable hanger is 6.0 in (15.3 cm) long and is constructed of 304
stainless steel. The cable hanger is not recommended for cable lengths
in excess of 500 ft (150 m) as it does not take advantage of the Kevlar®
strength members in the cable. |
 |
Mounting Clamp
The Mounting Clamp is used to secure 1.0" diameter transducers to
a bulkhead. The clamp is consists of a 304 stainless steel bracket with a
thermoplastic insert that holds the transducer housing. |
 |
Well Caps
Locking Well Caps enable transducers to be suspended within the
well while providing security. The vented orange PVC caps are 2" or 4" ID
and come with a 304 stainless steel dock (ring and threaded quick-link) to
support a cable hanger. The dual-hinge locking lid uses a Buna-N/Nitril
o-ring for a watertight seal. The black triangle warning label on the lid
can be marked for well identification. |
 |
Junction Box
The Junction Box provides a water-resistant enclosure for
electrically connecting the transducer cable to the users system via a
terminal strip. The enclosure also provides convenient location for
terminating the vent tube on vented gage transducers. The enclosure can be
ordered with either a vent filter or an aneroid bellows. The enclosure is
constructed of polycarbonate with a clear top incorporating a neoprene seal.
The junction box is rated IP66 and measures 9.45" L x 6.30" W x 4.72" H.
Mounting screws are provided. |
 |
Identification Tags
Identification Tags are available to attach to the transducer cable to
provide easy identification in the field. User-specified information is
laser engraved onto the 1.0" square tag, which is constructed of 304
stainless steel. |
Cable Splice Kit
The Cable Splice Kit provides a waterproof connection to extend
or repair Pressure Systems submersible cables. In many cases, the cable
splice kit is a more economical alternative for repairing damaged cable. The
kit includes all necessary items to electrically connect and insulate the
conductors, couple the vent tubes, and seal the 316 stainless steel housing
to either polyurethane and Tefzel® cable. Assembly instructions are also
included.
|
|
PN: 42-01-66181 |
Anti-Snag Cone for 1.0" diameter for use with molded
cable seal |
|
PN: 42-01-64134 |
Anti-Snag Cone for 1.0" diameter for use with gland
cable seal |
|
PN: 42-01-64136 |
Anti-Snag Cone for 0.75" diameter for use with gland
cable seal |
|
PN: 12-90-0931 |
Cable Hanger |
|
PN: 49-06-00PC |
Mounting Clamp |
|
PN: 840 |
Junction Box with Vent Filter
|
|
PN: 845 |
Junction Box with Aneroid Bellows |
|
PN: 36-05-1540T79 |
Identification Tags |
|
PN: 830 |
Cable Splice Kit |
|
PN: 860 |
RS-485 to RS-232 communication cable |
|
PN: 860-100 |
RS-485 to SDI-12 converter |
|
PN: 861-2A |
2" vented locking well cap with dock |
|
PN: 861-2B |
2" vented locking well cap |
|
PN: 861-2C |
2" well dock |
|
PN: 861-4A |
4" vented locking well cap with dock |
|
PN: 861-4B |
4" vented locking well cap |
|
PN: 861-4C |
4" well dock |
|
|
|
