Esterline Pressure Systems Logo header spacer Pressure Systems Site Map Pressure Systems Home
 
 

NetScanner™ System: 9816/98RK-1 Specifications

link arrow  return to 9816/98RK main page

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
   
Parameter
9816
98RK-1
Units
Comments

PNEUMATICS

Pressure Ranges (1)
10 (2.5)
20 (5.0)
N/A
inches WC
(kPa)

ranges < 100 psi (689 kPa) are bidirectional

ranges >= 100 psi (689 kPa) are unidirectional

1 (7.0)
2.5 (17)
5 (34)
10 (69)
15 (103)
30 (207)
45 (310)
100 (689)
250 (1724)
500 (3447)
750 (5171)
850 (5860)
N/A
psid (kPa)
Number of
Measurement Inputs
16
N/A

Pneumatic Fittings
.063 bulged tubulation, or
SAE 5/16-24 o-ring boss
(if front access specified)
SAE 7/16-24
o-ring boss

variety of compression
adapter fittings available
See page 6 for standard fittings
Media
Dry, non-corrosive gas

for liquid pressures refer to
Model 9022 datasheet
Proof Pressure (2)
3.0x
2.0X
1.5X
N/A
FS min
range < 15 psi (103 kPa)
range 15-100 psi (103-689 kPa)
range > 100 psi (689 kPa)
Burst Pressure
5.0X
3.0X
2.0X
N/A
FS min
range < 15 psi (103 kPa)
range 15-100 psi (103-689 kPa)
range > 100 psi (689 kPa)
Max Line Pressure (3)
100 (689)

600 (4134)
N/A
psi (kPa)

psi (kPa)
range <= 5 psi (34 kPa)

range > 5 psi (34 kPa)
Manifold Control
Pressure
80 (552)
125 (862)
psi (kPa)
min
max
Purge Pressure (4)
greater max input pressure
850 (5860)
psi (kPa)
psi (kPa)
min
max

STATIC PERFORMANCE

Measurement Resolution
±0.003
N/A
% FS

Static Accuracy (5)
After Rezero

±0.05
±0.15

N/A

% FS
% FS

range > 2.5 psi (17 kPa)
range <= 2.5 psi (17 kPa)
Total Thermal Error (7)
±0.001
±0.0015
N/A
%FS/șC
%FS/șC
range > 2.5 psi (17 kPa)
range <= 2.5 psi (17 kPa)
Line Pressure Effect
±0.0003

±0.0008

±0.001
N/A
% FS/psi

% FS/psi

% FS/psi
range <= 100 psi (689 kPa)

range >5 psi (45 kPa) <100 psi (689 kPa)
range <= 5 psi (34 kPa)
Measurement Rate
100
meas/ch/sec
engineering units

COMMUNICATION

Ethernet
10BaseT
half duplex
10/100/1000 BaseT
auto negotiating

 
Protocol
TCP and UDP

% FS

static or dynamic IP addressing

ELECTRICAL

Input Voltage Options
N/A
85-264
VAC 47-63 Hz
Operating Power
N/A
65 (7)
watts
Hardware Trigger

2.5

VDC TTL compatible differential input, ±5 VDC common mode voltage

ENVIRONMENTAL/PHYSICAL

Calibrated Temp Range (10)
0 to 60
șC
 
Operating Temp Range
0 to 50
șC
up to 95% non-condensing humidity
Storage Temp
-20 to 80
șC
Size
2.06 x 7.00 x 15.25
(5.2 x 17.7 x 38.7)
17.00 x 8.75 x 19.00
(43.2 x 22.2 x 48.3)
inches
(cm)
L x W x H
Weight
6.5
(3.0)
26.9
(12.2)
lb
(kg)
(1) Consult Factory for intermediate pressure ranges and multirange configurations.
(2) Maximum applied pressure without reducing sensor performance.
(3) For anticipated Line (Reference) Pressures . . .
  • above 100 psi (689 kPa) on FS Pressure Ranges of ,= 5 psi (34 kPa) or
  • above 600 psi (4137 kPa) on FS Pressure Ranges of > 5 psi (34 kPa)
  • calibration manifold should not be shifted at line pressure
  • rate of line pressure change should be no more than 10 psi/sec
(4) Purge pressure must be greater than maximum input pressure.
(5) Static accuracy includes combined errors due to non-linearity, hysteresis and non-repeatability.
(6) Includes thermal effects of zero & span relative to 25șC.
(7) Maximum power consumption with full compliment of 9816 scanners and external NetScanner System components in highest power draw configurations.
 

Specifications subject to change without notice.

 

 
Pressure Systems
34 Research Drive
Hampton, VA 23666
800.678.7226
KPSI Selection Guide Quality Policy
ISO-9001:2000
Receive E-Newsletter
IPC Member Logo WEEE/RoHS Statement
WEEE/RoHS
Statement
 


Home | Environmental Products | Industrial Products | Aerospace Products | Buy Now
KPSI Level and Pressure Selection Guide | Quartzonix Pressure Standard | NetScanner System | System 8400 |
Electronic Pressure Scanners | S8256 System | Miscellaneous Hardware | News Archive
Contact Us | Distributors | Links | Employment | Register | Search