| Parameter |
9021 |
Units |
Comments |
PRESSURE CHARACTERISTICS |
Number of
Transducers Supported |
12 |
channels |
pressure transducers or voltage inputs |
|
STATIC ACCURACY AND RESOLUTION |
| Measurement Resolution |
±0.003 |
% FS |
|
| Voltage Measurement
Accuracy (1) |
±0.025
±0.025
±0.05
±0.05 |
% FS
% FS
% FS
% FS |
-4500 to 4500 mV
-250 to 250 mV
-100 to 100 mV
-50 to 50 mV |
DATA SCAN & TRANSFER RATES |
| Measurement Scan Rate |
100 |
meas/ch/sec |
|
COMMUNICATION |
| Ethernet |
10Base
T |
|
half duplex |
| Protocol |
TCP
and UDP |
|
static or dynamic IP
assignment |
POWER/SIGNAL REQUIREMENTS |
| Input Voltage |
18 to 36 |
VDC |
unregulated supply |
| Input Current |
240(2) |
mA |
@ 24 VDC |
Hardware Trigger
Threshold |
2.5 |
VDC |
TTL compatible diff input, ±5
VDC common mode |
ENVIRONMENTAL/PHYSICAL |
| Calibrated Temp Range |
0 to 50 |
șC |
consult factory for extended
temps |
| Operating Temp Range |
0 to 70
-30 to 100 |
șC
șC |
less than 95% non-condensing humidity
9400 Series transducers only |
| Storage Temp |
-30 to 80 |
șC
|
|
| Size |
9.5 x 3.5 x 3.5
(24 x 9 x 9) |
inches
(cm) |
L x W x H |
| Weight |
1.92
(0.87) |
lb
(kg) |
|
TRANSDUCER COMMUNICATION |
| Ethernet |
10Base
T |
|
half duplex |
| Protocol |
TCP
and UDP |
|
static or dynamic IP
assignment |
