range less than 15 psi (103 kPa)
range 15-100 psi (103-689 kPa)
range greater than 100 psi (689 kPa)
Burst Pressure
5.0X
3.0X
2.0X
FS min
range less than 15 psi (103 kPa)
range 15-100 psi (103-689 kPa)
range greater than 100 psi (689 kPa)
Max Line Pressure (3)
100 (689)
600 (4137)
psi (kPa) psi (kPa)
range less than or equal to 5 psi (34 kPa)
range greater than 5 psi (34 kPa)
Manifold Control Pressure
80 (552) 125 (862)
psi (kPa)
min
max
Purge Pressure (4)
greater than max input pressure
850 (5860)
psi (kPa)
min
max
STATIC PERFORMANCE
Measurement Resolution
±0.003
% FS
Static Accuracy (5) After Rezero
±0.05
±0.15
% FS % FS
range greater than 2.5 psi (17 kPa)
range less than or equal to 2.5 psi (17 kPa)
Total Thermal Error (6)
±0.001 ±0.0015
%FS/șC %FS/șC
range greater than 2.5 psi (17 kPa) range less than or equal to 2.5 psi (17 kPa)
Line Pressure Effect
±0.0003
±0.0008
±0.001
% FS /psi
% FS/psi
% FS/psi
range greater or equal to 100 psi (689 kPa)
range greater than 5 psi (34 kPa) to
range less than 100 psi (689 kPa)
range less than or equal to 5 psi (34 kPa)
Measurement Rate
100
meas/ch/sec
engineering units
COMMUNICATION
Ethernet
10BaseT
half
duplex
Protocol
TCP
and UDP
static or
dynamic IP assignment
ELECTRICAL
Input Voltage
18 - 36
VDC
unregulated
Input Current
200
mA
@ 24 VDC
Hardware Trigger Threshold
2.5
VDC
TTL compatible differential input, ±5 VDC common mode voltage
ENVIRONMENTAL/PHYSICAL
Calibrated Temp Range (8)
0 to 50
șC
consult factory for extended temps
Operating Temp Range
-20 to 70
șC
up to 95% non-condensing humidity
Storage Temp
-20 to 80
șC
Size
9.50 x 3.50 x 3.537
(24.1 x 8.9 x 8.98)
inches
(cm)
L x W x H
Weight
6.5
(2.95)
lb
(kg)
Splashproof Rating
NEMA 13
Acoustic Noise Rating
160dB
Shock Rating
30
g
(1)
Standard ranges listed, consult factory for special ranges.
(2)
Maximum applied pressure without reducing sensor performance
(3)
For anticipated Line (Reference) Pressures . . .
above
100 psi (689 kPa) on FS Pressure Ranges of less than or equal to 5 psi (34 kPa) or
above
600 psi (4137 kPa) on FS Pressure Ranges of greater than 5 psi (34 kPa)
calibration manifold should not be
shifted at line pressure
rate of line pressure change should be no
more than 10 psi/sec
(4)
Purge pressure must be greater than maximum input pressure
(5)
Static accuracy includes the combined errors due to non-linearity, hysteresis and non-repeatability
(6)
Includes thermal effects of zero & span relative to 25șC
(8)
Consult factory for special temperature range calibration
Specifications subject to change without notice.
Pressure Systems
34 Research Drive
Hampton, VA 23666
800.678.7226
